Tehnilised andmed
https://www.planet.com.tw/en/product/igs-614hpt-v2?c1=power-over-ethernet&c2=renewable-energy-poe-system&c3=solar-battery-boost-poe-switch
| Hardware Specifications | |
|---|---|
| Copper Ports | 5 10/100/1000BASET RJ45 auto-MDI/MDI-X ports |
| PoE Injector Ports | Four ports with 802.3at PoE+ injector function (Ports 1 to 4) |
| SFP Slots | 1 1000BASE-SX/LX/BX SFP interface Compatible with 100BASE-FX SFP |
| Connector | Removable 6-pin terminal block Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2 |
| Power Requirements | 12~54V DC, 7A (max.) Redundant power with reverse polarity protection |
| Power Consumption | Max. 5.94 watts/20BTU@54V DC input (System) Max. 139 watts/474BTU(Ethernet + PoE Full Loading) |
| Dimensions(W x D x H) | 50 x 86.4 x 135 mm |
| Weight | 623g |
| Enclosure | IP40 metal case |
| Installation | DIN-rail kit and wall-mount kit |
| ESD Protection | 6KV |
| LED | 3 x LED for System and Power: Green: DC Power Green: DC Power 2 Red: Power Alarm 2 x LED for PoE Copper Port (Ports 1~Port 4): Green: LNK/ACT (10/100/1000Mbps) Amber: PoE-In-Use 2 x LED for 10/100/1000T Copper Port (Port 5): Green: 1000 LNK/ACT Amberr: 10/100 LNK/ACT 2 x LED for 100/1000X SFP Interface (Port 6): Green: 1000 LNK/ACT Amber: 100 LNK/ACT 4 x LED for PoE Power Usage (W) (Low to high): Amber: 30W, 60W, 90W and 120W |
| Switch Specifications | |
| Switch Architecture | Store-and-Forward |
| Switch Fabric | 12Gbps |
| Throughput (packet per second) | 8.93Mpps@64bytes |
| Address Table | 2K entries |
| Buffer Memory | 4M bits on-chip buffer memory |
| Jumbo Frame | 9Kbytes |
| Flow Control | Back pressure for half duplex IEEE 802.3x pause frame for full duplex |
| Power over Ethernet | |
| PoE Standard | IEEE 802.3at Power over Ethernet Plus/PSE |
| PoE Power Supply Type | End-span |
| Power Pin Assignment | 1/2(+), 3/6(-) |
| PoE Power Output | Per port 54V DC, max. 36 watts |
| PoE Power Budget (max.) | 60W@12V DC input 90W@24V DC input 120W@48V-54V DC input |
| Max. Number of Class 2 PDs | 4 |
| Max. Number of Class 3 PDs | 4 |
| Max. Number of Class 4 PDs | 4 |
| Standards Conformance | |
| Regulatory Compliance | FCC Part 15 Class A, CE |
| Stability Testing | IEC 60068-2-32 (free fall) IEC 60068-2-27 (shock) IEC 60068-2-6 (vibration) |
| Standards Compliance | IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3z Gigabit SX/LX IEEE 802.3x Full-Duplex Flow Control IEEE 802.3az Energy Efficient Ethernet (EEE) IEEE 802.3at Power over Ethernet Plus PSE IEEE 802.3af Power over Ethernet Plus IEEE 802.1p Class of Service |
| Environment | |
| Temperature | Operating: -40~75 degrees C Storage: -40~75 degrees C |
| Humidity | Operating: 5~90% (non-condensing) Storage: 5~90% (non-condensing) |